You’ve undoubtedly had a sink clog at some point in your life. Nobody likes it once the water won’t go away and everything becomes chaos. When your sink drains ages, it can get rusted and emit a foul odor. At the very least, you should clear your drain once a year. You may encounter clogs if you’ve not cleaned the drain in a while. So you might be thinking about how to remove bathroom sink drain? It’s not a pleasant task, but somebody has to do it. Read on for the most efficient method of cleaning your bathroom drain.
Types of Drain Sinks
Before getting to know about how to remove bathroom sink drain and replace it with a new one, you must examine the sink’s size. For the drain size, measure the entrance or refer to the manufacturer’s recommendations. If you choose the incorrect size, you risk having blocked drains or the drain falling into the sewer lines.
Having a drain with a varied finish is typically an excellent way to add a splash of color to the sink. Because they are visually appealing, brass drains are the most preferred sink drains.
The flexible finish of a bronze drain creates an eye-catching combo, and it goes well with copper and concrete sinks. A nickel drain shines nicely, but a chrome drain complements modern restrooms and sinks.
You may prevent typical hazards by using the appropriate type of sink drain. The following are some of the most prevalent types of sink drains:
Pop-up drains are ideal for sinks where you wash your hands and face. They enable water to overflow, allowing you to fill your sink. Pop-up drains are the most straightforward repair because they require 10 minutes to complete and a pair of pliers. It is a beautiful alternative if you need to replace a drain.
Plugless Grid Drain
Grid drains work well with vessel sinks, which are typical bowl-style sinks. A grid is a grated surface made up of metal plates with holes. This drain style prevents tiny particles from falling into your drain pipes and clogging them. Grid drains require more upkeep, but they have a better chance of avoiding obstructions.
Lift & Turn Drain
Lift and turn drains are the most flexible since they may get used in almost any sink. Drop-in, under-mount, or vessel sinks are all examples of this. Lifting and twisting the knob on the raise & turn drain allows the water to drain. Lift and turn drains are simple to install and remove with a flat-head screwdriver.
Chain and Plug Drain
As the name implies, the drain is linked to the faucet by a chain, and it pulls on it to drain the water. This drain typically includes a basket strainer, which allows your sink to capture tiny things.
How To Unclog A Toilet When Nothing Works? Do THIS.
How to remove bathroom sink drain?
Follow the steps below:
Remove the stopper by hand
Most stoppers may get removed manually, requiring no special tools or abilities. Experiment with lifting and twisting the stopper, and this may be all you need to get out of it.
Remove Items From Under The Sink
If you can’t pull the stopper out, you’ll need to get just below the sink to release it. Therefore, the next step is to extract everything stored beneath the sink to make room for you to work.
Locate The Horizontal Plunger Rod
Bring your flashlight and place it beneath the sink. The horizontal rod that links the stopper to a strap must get located. It should be easy to spot — it’s a rod attached to the vertical belt, a piece of metal with holes.
Locate The Clip Attaching The Rod And The Strap
When you’ve located the rod and the metal strap it’s attached to, you’ll notice that they’re held together by a metal clip. Loosen this clip just so the rod and strap are no longer connected, and store it somewhere secure so it doesn’t go misplaced.
Unscrew The Pivot Nut
The opposite rod you disconnected from the strap must get joined to a pivot nut, which you must now remove. It’s a good reason to place a pail under the sink at this stage to collect any water that comes out after you unscrew this nut.
Try to unscrew the nut with your hands while holding the bucket.
Remove The Stopper
The stopper will now be loose, and you should be able to take it out of the sink with your hand. While it’s out, you might want to clean it more, so soak it in warm water with the soap and vinegar before putting it back.
Remove Hair With The Hair Remover
Before reinstalling the stopper, remove any hair or dirt accumulated in the hole. Use the hair removal tool to get most of the trapped hair and dirt out of the sink.
Before reinstalling the plug, use this opportunity to thoroughly clean the drainpipe, especially if it was previously clogged.
Put Everything Back Into Place
Once you’ve washed everything up and freed the drain, it’s time to start putting everything back together, so reverse the process. Replacing the sink stopper in the hole is the first step.
After that, go under the sink and tighten the nuts using wrenches or pliers. Connect the rod to the strap using the clip you removed earlier after tightening the nut. You’ve successfully restored it if it glides up and down when you push the level.
You don’t need a plumber to replace bathroom sink drain flanges if you follow the appropriate instructions. It would be best to clear the drain at least once per year. When you try to accomplish things on your own, it should be helpful.